AdapterId 05125h AdapterName "Tecmar QT-60, QT-90, QT-125 Tape Drive" NumBytes 2 NamedItem Prompt "QT Host Adapter I/O Location" choice "I/O 300" pos[0]=XXXX000Xb io 0300h-0301h choice "I/O 338" pos[0]=XXXX001Xb io 0338h-0339h choice "I/O 368" pos[0]=XXXX010Xb io 0368h-0369h choice "I/O 398" pos[0]=XXXX011Xb io 0398h-0399h choice "I/O 200" pos[0]=XXXX100Xb io 0200h-0201h choice "I/O 238" pos[0]=XXXX101Xb io 0238h-0239h choice "I/O 310" pos[0]=XXXX110Xb io 0310h-0311h Help "This port can be assigned to any of seven (7) I/O locations. Use the F5=Previous and the F6=Next keys to change this assignment in the 'Change configuration' window. Conflicting assignments are marked with an asterisk and must be changed to use the adapter." NamedItem Prompt "QT Host Adapter Interrupt Number" choice "Int 3" pos[0]=XX00XXXXb int 3 choice "Int 4" pos[0]=XX01XXXXb int 4 choice "Int 5" pos[0]=XX10XXXXb int 5 choice "Int 6" pos[0]=XX11XXXXb int 6 Help "This assignment need only be changed if you do not wish certain programs to share interrupts. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window." NamedItem Prompt "QT Host Adapter DMA Arbitration" choice "Level 1" pos[1]=XXXX0001b arb 1 choice "Level 2" pos[1]=XXXX0010b arb 2 choice "Level 3" pos[1]=XXXX0011b arb 3 choice "Level 5" pos[1]=XXXX0101b arb 5 choice "Level 6" pos[1]=XXXX0110b arb 6 choice "Level 7" pos[1]=XXXX0111b arb 7 choice "Level 0" pos[1]=XXXX0000b arb 0 choice "Level 4" pos[1]=XXXX0100b arb 4 Help "This assignment need only be changed if it is in conflict with another assignment. Conflicting assignments are marked with an asterisk. Use the F5=Previous and the F6=Next keys to change arbitration level assignments if you are in the 'Change configuration' window."